2/4 Flutes Solid Flattened Carbide End Mill

HRC50 For General Machining

Product Name 2/4  flutes HRC50° tungsten carbide end milling cutter
HRC 50°
Coating AlTiN, High aluminum content, Black
Flute 2/4
Material Tungsten Carbide Rod
Applicable materials  HRC≤50 Alloy steel, nonferrous metal, gray cast iron, common dia steel, heat resistant alloy steel.
HRC50 Tungsten Carbide End Mill

Excellent and stable performance

The raw material is foundation of quality, we use our own grade CF10 tungsten carbide rod, which has high wear resistance and strength.

The performance will be consistent and long service life.

Tungsten Carbide Rod Material

Grade Co WC grain size Hardness T.R.S
CF10 10% 0.8μm HRA 91.7 3600N/mm²

TiAlN Coating

The blade is covered with a TiALN coating and increases the wear resistance of the milling cutter. It can be used for rough or finish  machining under HRC50 material.

Blade design for stable

Two blades with helical chip removal

It is not easy to collapse, enhance end mill chip removal ability, so that the cutting ability of the tool is more stable.

Chamfer Design

Enhance the shock resistance of the milling cutter.

Standard Size
d l D L F
1.0 3 4 50 2/4
1.5 4 4 50 2/4
2.0 6 4 50 2/4
2.5 7 4 50 2/4
3.0 8 3/4 50 2/4
3.5 10 4 50 2/4
4.0 11 4 50 2/4
5.0 13 5 50 2/4
5.0 13 6 50 2/4
6.0 16 6 50 2/4
7.0 20 8 60 2/4
8.0 20 8 60 2/4
9.0 25 10 75 2/4
10.0 25 10 75 2/4
11.0 30 12 75 2/4
12.0 30 12 75 2/4
13.0 35 14 80 2/4
14.0 35 14 80 2/4
15.0 40 16 100 2/4
16.0 40 16 100 2/4
18.0 45 18 100 2/4
20.0 45 20 100 2/4
Lengthening
d l D L F
1.0 5 4 75 2/4
2.0 9 4 75 2/4
2.5 10 4 75 2/4
3.0 15 3/4 75 2/4
3.0 15 3/4 100 2/4
4.0 20 4 75 2/4
4.0 20 4 100 2/4
5.0 25 5 75 2/4
5.0 25 5 100 2/4
5.0 25 6 75 2/4
5.0 25 6 100 2/4
6.0 25 6 75 2/4
6.0 25 6 100 2/4
8.0 30 8 75 2/4
8.0 30 8 100 2/4
8.0 30 8 150 2/4
10.0 40 10 100 2/4
10.0 50 10 150 2/4
12.0 45 12 100 2/4
12.0 55 12 150 2/4
14.0 35 14 100 2/4
14.0 60 14 150 2/4
16.0 70 16 150 2/4
18.0 70 18 150 2/4
20.0 80 20 150 2/4
Workpiece material HRC -30 HRC 30-35 HRC35-40 HRC40-45 HRC 45-60
d Rotating Feed Rotating Feed Rotating Feed Rotating Feed Rotating Feed
mm r/min mm/min r/min mm/min r/min mm/min r/min mm/min r/min mm/min
1 16000 120 9500 75 7600 70 5700 66 3200 24
2 9500 160 5700 105 4500 95 3300 82 1900 35
3 7400 220 4500 140 3600 125 2600 110 1500 46
4 6400 300 3800 180 3000 160 2200 150 1270 60
5 5700 370 3400 220 2700 200 2000 180 1150 75
6 5300 480 3200 290 2500 260 1900 220 800 96
8 4000 480 2400 290 1900 260 1400 220 800 96
10 3200 480 1900 290 1500 250 1100 210 640 93
12 2600 460 1600 280 1300 250 950 210 530 93
16 2000 360 1200 220 950 200 710 170 400 72
20 1600 290 950 170 760 150 570 135 320 57